Feedback to this page: click here

Comparing lithography methods at DTU Danchip

	UV Lithography	DUV Stepper Lithography	E-beam Lithography	Nano Imprint Lithography
Generel description	Pattern transfer via UltraViolet (UV) light	Pattern transfer via DeepUltraViolet (DUV) light	Patterning by electron beam	Pattern transfer via hot embossing (HE)
Pattern size range	Resist type, thickness, and pattern dependent ~1.25 µm and up	pattern type, shape and pitch dependent ~200 nm and up	~12 nm - 1 µm	~20 nm and up
Resist type	UV sensitive: AZ 5214E, AZ 4562, AZ MiR 701 (positive) AZ 5214E, AZ nLOF 2020, SU-8 (negative)	DUV sensitive JSR KRF M230Y, JSR KRF M35G (positive) UVN2300-0.8 (negative)	E-beam sensitive AR-P6200 CSAR, ZEP502A , PMMA, HSQ, mr-EBL, AR-N 7520	Imprint polymers: Topas PMMA
Resist thickness range	~0.5µm to 20µm	~50nm to 2µm	~30nm to 0.5 µm	~ 100nm to 2µm
Typical exposure time	2s-30s pr. wafer	Process depended, depends on pattern, pattern area and dose	Depends on dose, Q [µC/cm2], beam current, I [A], and pattern area, A [cm2]: t = Q*A/I	Process depended, depends also on heating and cooling temperature rates
Substrate size	small samples 50 mm wafers 100 mm wafers 150 mm wafers	100 mm wafers 150 mm wafers 200 mm wafers	We have cassettes that fit to 4 small samples (20mm, 12mm, 8mm, 4mm) 6 wafers of 50 mm in size 3 wafers of 100 mm in size 1 wafer of 150 mm in size Only one cassette can be loaded at time	small samples 50 mm wafers 100 mm wafers 150 mm wafers
Allowed materials	Any standard cleanroom material	Any standard cleanroom material	Any standard cleanroom material	Any standard cleanroom material

Equipment Pages

Pretreatment

Coaters

Baking

UV Exposure

Deep-UV Exposure

DUV Stepper (Canon FPA-3000EX4)

Electron Beam Exposure

E-Beam Writer 9500 (JEOL JBX-9500FSZ)

Development

Strip

Lift-off

NanoImprint Lithography

Lithography Tool Package Training

DTU Danchip offers a Tool Package Training in Lithography; the course includes theory on lithographic processes and equipments, as well as training in equipment operation and processing in the cleanroom.

The course is for all users that intend to perform any kind of lithographic processing in the cleanroom.

Lithography Tool Package Training
Schedule	Lecture once a month (~3.5 hours). NEXT LECTURE: Starting February 2017 (Week 06), the lecture will be replaced by videos and a short "questions and exercises" session. More info will come later this month. Training session once a week, max. 4 persons per session (9:00 - 14:00). NEXT SESSIONS: 8th of February, 15th of February, 22nd of February
Location	Seminar room bulding 347 at DTU Danchip and in cleanroom facilities at DTU Danchip
Qualified Prerequisites	Cleanroom safety course at DTU Danchip Wet Chemistry Course at DTU Danchip (Lab-Intro)
Preparations	Before the lecture Read Sami Franssila "Introduction to Microfabrication" (2010), Chapter 9: Optical Lithography. (Available online from DTU campus, see link below) Optional but recommended: Watch the training videos (training videos can be found below). Before training session Watch the training videos of spin coating (automatic), exposure (operation and alignment), and development (automatic). The training videos can be found below. Study the equipment manuals. The manuals are available in LabManager. Study the TPT process flows (first print and alignment). The process flows can be found below.
Course Responsible	The Lithography Group at DTU Danchip: sign up for the course by e-mailing to lithography@danchip.dtu.dk.
Learning Objectives	Describe fundamental parts of lithographic processing in a cleanroom, design of process flows Authorization to use spin coater, mask aligner, and developer at DTU Danchip Calculate relevant process parameters Analyze and apply your results of lithographic processing