Specific Process Knowledge/Lithography/EBeamLithography/EBLLandingpage: Difference between revisions

← Older edit Newer edit →

VisualWikitext

Revision as of 15:20, 26 January 2023 view source Thope (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231 2,178 edits →Substrate preparation ← Older edit		Revision as of 09:04, 27 January 2023 view source Thope (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab347-labadviser-users-35231 2,178 edits →Substrate preparation Newer edit →
Line 133:		Line 133:

	== Substrate preparation ==		== Substrate preparation ==
	An appropriate EBL resist must naturally be applied to the substrate. DTU Nanolab supplies a number of standard resists, please consult the table below. The default positive EBL resist is AR-P 6200.09 (CSAR). CSAR (AR-P 6200.09) is installed on Spin ~~coater~~ Gamma E-beam & UV for easy spin coating of 2", 4" and 6" substrates. Other substrate sizes or resist have to be used in the Labspin 2/3 coating systems. The standard resist bottles are stored in the chemical cupboard in E-4.		An appropriate EBL resist must naturally be applied to the substrate. DTU Nanolab supplies a number of standard resists, please consult the table below. The default positive EBL resist is AR-P 6200.09 (CSAR). CSAR (AR-P 6200.09) is installed on [[Specific_Process_Knowledge/Lithography/Coaters#Spin Coater: Gamma E-beam and UV\|Spin Coater: Gamma E-beam and UV]] for easy spin coating of 2", 4" and 6" substrates. Other substrate sizes or resist have to be used in the Labspin 2/3 coating systems. The standard resist bottles are stored in the chemical cupboard in E-4.