Specific Process Knowledge/Lithography: Difference between revisions

From LabAdviser
← Older editNewer edit →
Visual
Mmat (talk | contribs)
NLAB-Employees-701, NLAB-LabmanagerAllUsers
285 edits
mNo edit summary
Mmat (talk | contribs)
NLAB-Employees-701, NLAB-LabmanagerAllUsers
285 edits
Line 239: Line 239:
DTU Nanolab offers a Tool Package Training for Lithography (TPT Lithography). You are required to pass this course, in order to get access to the lithography equipment inside the DTU Nanolabs cleanroom facility. The course includes theory on lithographic processes and training videos for equipment operation. The theory part consists of lecture videos followed by quizzes for each section. Once completed successfully, you can do the online training that explains the operation for the specific lithography equipment you want to use in more detail. After completing the online training, you can request hands-on training for the equipment inside the cleanroom via [mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk].  
DTU Nanolab offers a Tool Package Training for Lithography (TPT Lithography). You are required to pass this course, in order to get access to the lithography equipment inside the DTU Nanolabs cleanroom facility. The course includes theory on lithographic processes and training videos for equipment operation. The theory part consists of lecture videos followed by quizzes for each section. Once completed successfully, you can do the online training that explains the operation for the specific lithography equipment you want to use in more detail. After completing the online training, you can request hands-on training for the equipment inside the cleanroom via [mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk].  


The course is available via DTU Learn. You sign up for the course by enrolling yourself in the course here.
The course is available via DTU Learn. You sign up for the course by enrolling yourself in the course [https://www.nanolab.dtu.dk/access/cleanroom-access/equipment-training/lithography-tool-training here].


'''Course Description'''
'''Course Description'''
Line 260: Line 260:
* Resist, substrates and pre-treatment
* Resist, substrates and pre-treatment
* Post-lithography steps
* Post-lithography steps


=Knowledge and Information about Lithography=
=Knowledge and Information about Lithography=

Revision as of 12:56, 12 February 2025

The contents on this page, including all images and pictures, was created by DTU Nanolab staff unless otherwise stated.

Feedback to this page: click here


There are four different types of lithography available at DTU Nanolab:


Comparing lithography methods at DTU Nanolab

UV Lithography DUV Stepper Lithography E-beam Lithography Nano Imprint Lithography
Generel description Pattern transfer via ultraviolet (UV) light Pattern transfer via deep ultraviolet (DUV) light Patterning by electron beam Pattern transfer via hot embossing (HE)
Pattern size range

~0.6 µm and up
(resist type, thickness, and pattern dependent)

~200 nm and up
(pattern type, shape and pitch dependent)

~12 nm - 1 µm
(and larger at high currents)

~20 nm and up

Resist type

UV sensitive:

  • AZ 5214E, AZ 4562, AZ MiR 701 (positive)
  • AZ 5214E, AZ nLOF 2020, SU-8 (negative)

DUV sensitive

  • JSR KRF M230Y, JSR KRF M35G (positive)
  • UVN2300-0.8 (negative)

E-beam sensitive

  • AR-P6200 CSAR, ZEP502A , PMMA (positive)
  • HSQ, mr-EBL, AR-N 7520 (negative)

Imprint polymers:

  • Topas
  • PMMA
  • mr-I 7030R
Resist thickness range

~0.5 µm to 200 µm

~50 nm to 2 µm

~30 nm to 1 µm

~ 100 nm to 2 µm

Typical exposure time

10 s - 3 min pr. wafer using mask aligners
10 min - 5 hours pr. wafer using maskless aligners

Process dependent:

  • Pattern
  • Pattern area
  • Dose

Throughput is up to 60 wafers/hour

Process dependent:

  • Dose, Q [µC/cm2]
  • Beam current, I [A]
  • Pattern area, a [cm2]

time [s] = Q*a/I

Process dependent, including heating/cooling rates

Substrate size
  • chips down to 3 mm x 3 mm
  • 50 mm wafers
  • 100 mm wafers
  • 150 mm wafers
  • 200 mm wafers
  • 100 mm wafers
  • 150 mm wafers
  • 200 mm wafers

We have cassettes fitting:

  • 4 small samples (slit openings: 20mm, 12mm, 8mm, 4mm)
  • 6 wafers of 50 mm in size
  • 3 wafers of 100 mm in size
  • 1 wafer of 150 mm in size
  • 1 wafer of 200 mm in size

Only one cassette can be loaded at a time

  • small samples
  • 50 mm wafers
  • 100 mm wafers
  • 150 mm wafers
Allowed materials

Any standard cleanroom material

Any standard cleanroom material

Any standard cleanroom material, except:

  • Materials that will degas
  • Graphene requires special treatment

Any standard cleanroom material


Equipment Pages

Resist

Pretreatment

Coating

Baking

UV Exposure Tools

Deep-UV Exposure

Electron Beam Exposure

Nano Imprint Lithography


Development

Descum

Lift-off

Strip


Lithography Tool Package Training

DTU Nanolab offers a Tool Package Training for Lithography (TPT Lithography). You are required to pass this course, in order to get access to the lithography equipment inside the DTU Nanolabs cleanroom facility. The course includes theory on lithographic processes and training videos for equipment operation. The theory part consists of lecture videos followed by quizzes for each section. Once completed successfully, you can do the online training that explains the operation for the specific lithography equipment you want to use in more detail. After completing the online training, you can request hands-on training for the equipment inside the cleanroom via training@nanolab.dtu.dk.

The course is available via DTU Learn. You sign up for the course by enrolling yourself in the course here.

Course Description

  1. Online lecture videos (theory)
  2. Quizzes for each section
  3. Online training videos (equipment operation)
  4. Hands-on training

Hands on training can be requested via training@nanolab.dtu.dk.


Learning objectives

Learn about the fundamentals of lithography processing in a cleanroom fabrication lab:

  • Coating
  • Exposure
  • Development
  • Resist, substrates and pre-treatment
  • Post-lithography steps

Knowledge and Information about Lithography

Literature


Lecture videos

  • Lithography TPT lecture videos:
    • Current version (6 videos, 1:28 hours:minutes in total) on YouTube
    • Old version (7 videos, 2:41 hours in total) on YouTube
  • A full lecture series from a UT Austin course on microfabrication by "litho guru" Chris Mack. Half of the lectures are on (projection) lithography :-)

Training videos

Playlists on YouTube:


Manuals NB: Access to manuals require DTU login


Process Flows


Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography&oldid=50701"