Jump to content

Specific Process Knowledge/Lithography/EBeamLithography: Difference between revisions

← Older edit
VisualWikitext
Elelop (talk | contribs)
NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891, NLAB-Nlab347-labadviser-users-35231
26 edits
Taran (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891
3,526 edits
 
(2 intermediate revisions by one other user not shown)
Line 314: Line 314:
Pattern preparation is somewhat different depending on if a pattern is exposed on JEOL 9500 or Raith eLine Plus. Please refer to the correct pattern preparation section below.
Pattern preparation is somewhat different depending on if a pattern is exposed on JEOL 9500 or Raith eLine Plus. Please refer to the correct pattern preparation section below.


[[Specific Process Knowledge/Lithography/EBeamLithography/JEOLPatternPreparation|Pattern preparation for exposure on JEOL 9500]]
*[[Specific Process Knowledge/Lithography/EBeamLithography/JEOLPatternPreparation|Pattern preparation for exposure on JEOL 9500]]


[[Specific Process Knowledge/Lithography/EBeamLithography/RaithPatternPreparation|Pattern preparation for exposure on Raith eLine Plus]]
*[[Specific Process Knowledge/Lithography/EBeamLithography/RaithPatternPreparation|Pattern preparation for exposure on Raith eLine Plus]]


== Job preparation ==
== Job preparation ==
Job preparation is also different depending on if a pattern is exposed on JEOL 9500 or Raith eLine Plus. Please refer to the correct job preparation section below.
Job preparation is also different depending on if a pattern is exposed on JEOL 9500 or Raith eLine Plus. Please refer to the correct job preparation section below.


[[Specific Process Knowledge/Lithography/EBeamLithography/JEOLJobPreparation|Job preparation for exposure on JEOL 9500]]
*[[Specific Process Knowledge/Lithography/EBeamLithography/JEOLJobPreparation|Job preparation for exposure on JEOL 9500]]


[[Specific Process Knowledge/Lithography/EBeamLithography/RaithJobPreparation|Job preparation for exposure on Raith eLine Plus]]
*[[Specific Process Knowledge/Lithography/EBeamLithography/RaithJobPreparation|Job preparation for exposure on Raith eLine Plus]]


== Job execution ==
== Job execution ==
Line 333: Line 333:
== Development ==
== Development ==


AR 600-546 and ZED N-50 developers are available in a semi automatic puddle developer [[Specific_Process_Knowledge/Lithography/Development#Developer:_E-beam|Developer: E-beam]] in E-4, mainly intended for development of AR-P 6200 and ZEP 520A. It has automatic recipes for puddle development cycles for 10, 30 and 60 seconds of either of the two developers, each finishing off with an IPA rinse and drying cycle. The system can handle chips, 2", 4" and 6" wafers.
AR 600-50 and ZED N-50 developers are available in a semi automatic puddle developer [[Specific_Process_Knowledge/Lithography/Development#Developer:_E-beam_02|Developer: E-beam 02]] in E-4, mainly intended for development of AR-P 6200 and ZEP 520A. It has automatic recipes for puddle development cycles for 10, 30 and 60 seconds of either of the two developers, each finishing off with an IPA rinse and drying cycle. The system can handle chips, 2", 4", 6" and 8" wafers.




Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/EBeamLithography"