Specific Process Knowledge/Back-end processing
The contents on this page, including all images and pictures, was created by DTU Nanolab staff unless otherwise stated.
Feedback to this page: click here
Back-end processing
Back-end (or Post-fab) Processing are typical processes used to finish up your wafer/chip. This includes thinning and cutting out the wafer in chips that can be put on a carrier, a board or in a package, attaching the chip to the carrier and connecting it with wires to get electrical access to it.
These processes are usually carried out a number of different places. We also have a laboratory called PackLab located in building 347 1st floor. It is a class 1000 cleanroom and in here we have equipment commonly used for back-end processing. Some equipment is further placed in the basement of building 346 and some on the 1st floor in building 346.
| Note! Packlab is currently under re-construction and planned to re-open in Q2 2025. |
|---|
| Some of the tools will find new temporary locations in building 346 or building 451. Please ask our staff for more information. |
Below you can see a list of equipment for back-end processing that is available at DTU Nanolab.
Choose an equipment
- Stylus profilometer measurements
- Chip/die mounting
- Die Bonder (eutectic metal)
Will be temporary taken out of service during the PolyFabLab construction.
- Die Bonder (eutectic metal)
- Wire bonding
- TPT Wire Bonder Will be temporary taken out of service during the PolyFabLab construction.
- Ball Wire Bonder
- TPT Wire Bonder
- Wafer dicing/machining
- Molding
- Polymer Injection Molder !! Machine now owned and moved to DTU Construct !!
- Hot Embosser
- Pick & place
Choose processing method
| Lapping/polishing | Cutting/cleaving | Milling | Die bonding | Wire bonding |