LabAdviser/Courses/TPT SEM

The contents on this page, including all images and pictures, was created by DTU Nanolab staff unless otherwise stated.

Feedback to this page: click here

The SEM Tool Package Training

DTU Nanolab offers a Tool Package Training (TPT) course in Scanning Electron Microscopy (SEM). This course is mandatory for academic users who want to perform SEM imaging at Nanolab unless you will only use the Hitachi TM3030 tabletop SEM. The course includes theory on scanning electron microscopy (including some reading and online lectures) followed by by quizzes for each section, as well as training videos for equipment operation. After completing the online course, a practical group training can be arranged.

The SEMs at DTU Nanolab are located in building 314/307, 346, and 375. Different SEMs are used for different applications, and the practical training requirements differ from building to building and from SEM to SEM. The main SEM and TEM building is 314/307, which is open for all users from academia and industry. The SEM in building 375 is owned by DTU Offshore and the SEMs in building 346 are reserved for users who work with fabrication at Nanolab, i.e., in the cleanroom or the other labs in buildings 346 and 347.

The SEM TPT course is available via DTU Learn. You can enroll yourself here.

Course Layout (Building 314/307 and 375)

Online reading & lecture videos (theory)
Quizzes for each section
Individual hands-on training

The structure of the hands-on training depends heavily on the type of sample, type of characterization, i.e., which SEM, detectors, and sample preparation technique will be used, as well as previous user experience.

To request training in building 314, 307 or 375, please contact us here.

Course Layout (Building 346) - Academic Track: "Students and Staff"

Online reading & lecture videos (theory)
Quizzes for each section
Online training videos (equipment operation)
Read SEM Supra 1 manual
Group hands-on training (SEM Supra 1 in basement 346)
Individual hands-on training (commonly SEM Supra 1 in basement 346 or SEM Supra 3 in cleanroom)

As an alternative to watching the theory lecture videos online, an in-person lecture is offered on an irregular basis, mostly in combination with PhD courses or 3-week courses. You can contact the SEM group to inquire for a date or look at the course page in DTU Learn.

Individual hands-on training can be requested after completion of the theoretical course via sem@nanolab.dtu.dk.

Course Layout (Building 346) - Commercial Track: "Company Users"

optional: Online reading & lecture videos (theory)
optional: Quizzes for each section
Online training videos (equipment operation)
Read SEM Supra 1 manual
Group hands-on training (SEM Supra 1 in basement 346)*
Individual hands-on training (commonly SEM Supra 1 in basement 346, esle SEM Supra 3 in the cleanroom)*

(*) If a group hands-on training session is timely available, company users are expected to join the group session, else two individual hands-on training sessions can be arranged. Individual hands-on training can be requested via training@nanolab.dtu.dk.

Learning objectives

Explain SEM electron optics and detectors
Understand possibilities and limitations of SEM
Know how to optimize SEM images
Know which tool to use and who to contact

Qualifying Prerequisites

Intro to building 346 (Basement, polisher lapper/155 and dicer/157) must be obtained before the group training session, or
Access Cleanroom safety course at DTU Nanolab must be obtained before the group training session

Course Responsible

Jonas Michael-Lindhard (346)
Rebecca Bolt Ettlinger (346)
Berit Wenzel (314/307)
Marie Karen Trace Hong Lin (314/307) - Softmatter and life science samples

General question regarding the TPT can be send to SEM@nanolab.dtu.dk.

Material for preparations and further information (see also DTU Learn)

Pre hands-on training videos
(Watch before the hands-on training)

The 10 Hands-on training vidoes can be found on YouTube: Equipment operation training videos (mandatory before Hands-on Session)

SEM Manuals (346)
(Read before the hands-on training)