LabAdviser/314/Microscopy 314-307/TEM/Sample Holders
Feedback to this page: click here
THIS PAGE IS UNDER CONSTRUCTION
Holders for general imaging
Fischione 2020 tomography holder
FEI single tilt holder
FEI double tilt
Gatan double tilt beryllium holder
Holders for EDS analyses
Gatan double tilt beryllium holder
FEI double tilt
Holders for heating experiments
DensSolution Wildfire single tilt heating holder
MEMS-based holder for heating up to 1300°C. It is a single tilt holder which is also suitable for EDS.
Protochips Fusion Select double tilt heating holder
This MEMS-based holder has 6 contacts, which allows for heating, electrical biasing/measuring and the combination of both. It has beta-tilt capabilities up to about +/- 20° and is suitable for EDS. The chips can be heated up to about 1200°C.
Gatan 652 In double tilt heating holder
Classical furnace heating holder which is suited for standard 3mm samples. The heating furnace is made from Inconel and suited for heating in oxidizing gas environments (ETEM) up to about 800°C. This holder is not suited for EDS because of the furnace design.
Gatan 652 Ta double tilt heating holder
Classical furnace heating holder which is suited for standard 3mm samples. The heating furnace is made from tantalum and ONLY suited for heating in non-oxidizing gas environments (ETEM) up to about 1000°C. This holder is not suited for EDS because of the furnace design.
Holders for cryo experiments
Gatan single tilt cryo holder
Gatan double tilt liquid nitrogen cold holder
He cooling holder
Holders for tomography
Fischione 2020 tomography holder
Fischione 2040 dual axis tomography holder
Fischione 2070 vacuum transfer tomography holder
Special Holders
DensSolution Climate gas and heating holder
Fischione two-contact biasing holder