Specific Process Knowledge/Characterization/XRD/XRD Powder/Measurement tips

From LabAdviser
< Specific Process Knowledge‎ | Characterization‎ | XRD‎ | XRD Powder
Revision as of 12:51, 8 July 2022 by Reet (talk | contribs) (ny side som ikke når at bli færdig)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Feedback to this page: click here

THIS PAGE IS UNDER CONSTRUCTION

=<span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|200px]]=


Choosing measurement parameters

A detailed manual on the Aeris XRD is found on the wiki of the International Ocean Discovery Project.

...Scanning at angles less than 5° 2θ you will need to lower the knife (anti scatter). .... at low angles you also need a narrower slit (which will reduce intensity but also the irradiated area)

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/XRD/XRD_Powder/Measurement_tips&oldid=40596"