Specific Process Knowledge/Characterization/Profiler

{{cc-nanolab}

Feedback to this page: click here

DektakXTA info copied to https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Dektak_XTA#Performance_and_Process_Parameters

P17 info copied to https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Tencor_P17#Tencor_P17_Stylus_Profiler

info moved to https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Sensofar_S_Neox

info moved to https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Filmetrics

info moved to https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/Dektak_3ST#Dektak_3ST

Stylus Profiler: Dektak150

The stylus profiler Dektak150 is intended for profile measurements on samples outside the cleanroom. The Dektak150 is especially well suited for measuring soft samples as it can be adjusted to apply lower force than the other stylus profilers at Nanolab.

The user manual, technical information and contact information can be found in LabManager:

Stylus profiler:Dektak150 in LabManager

The computer is not connected to the network but data can be saved on a dedicated USB and transfered to a computer on the network.

Info about measurement accuracy can be found here.

Equipment performance and process related parameters

Purpose	Profiler for measuring micro structures\|	Single line profiles Surface roughness on a line scan
Location	Building 347, room 080	North-East corner of the building, in the basement When you enter the building from the East, you enter directly into the basement.
Performance	Scan range x y	Line scan x: 50 µm to 55 mm in a single scan
	Scan range z	50 Å to 1 mm
	Resolution x y	Theoretically down to 0.003 µm (in practice the resolution is limited by the tip size)
	Resolution z	1Å (@65kÅ), 10Å (@655 kÅ), 80 Å (@5240 kÅ), 160 Å (@1mm)
	Maximum sample thickness	100 mm
Hardware settings	Tip radius	5 µm 45^o cone 0.2 µm 45^o cone on request
Substrates	Substrate size	Up to 6"
	Substrate materials allowed	In principle all materials