Specific Process Knowledge/Etch/DRIE-Pegasus/Pegasus-2

Feedback to this page: click here

This system is a research tool and not available to the users

If you want to get access to the tool, then talk to professor Henry Jansen

• Nanoscale silicon etching with SF6 and O2
• Black silicon on Demand

Current setup and rules on Pegasus 2

Click here to access older configurations.

The current configuration is

{{Template:Peg2configcontent1

Currently valid from November 2020 onwards

Item	The currently applied modification	Comments
ItemName= ItemConfiguration= SF6: 50 sccm O2: 50 sccm Ar: 283 sccm N2: 500 sccm He: 11 sccm CO2: (It is not in the software) ItemComment=OnlySF6 and O2 are used for Si, PR, and Cr etch. The rest is only make-up Access to Pegasus 2 configuration templates Pegasus 2 configuration table version 1 Table header: Template:Peg2configheader1 Table content: Template:Peg2configcontent1