FEI Tecnai T12 Biotwin

Sample holders

The default specimen holder for the T12 is called Single-Tilt (FEI ST) and it is always present in the microscope room.
The lab has also other specimen holders used for various application e.g. heating (furnace and MEMS-based), cooling, biasing and tomography. For information on the various specimen holders see HERE

Who may operate the Tecnai T12

In order to start training on the Titan ATEM you must by fully trained in the Tecnai TEM. Most of the basic operation on the Titan ATEM is the same as on the Tecnai with the added complexity of the aberration corrector and the monochromator.

When you have demonstrated a high level of familiarity with the microscope you are allowed to book it via LabManager and use it 24/7.

Booking

Booking on the ATEM is done by the users in accordance to the booking rules. Booking rules can be found in LabManager under "Documents" for the ATEM.

Further information

Titan ATEM in LabManager

Calibration

Magnification calibration cameras

Process information

The following techniques and processes are available on the microscope (list isn't complete):

Techniques:

EDS/WDS

Processes:

Cryo-TEM

Tips and Tricks

Here you can find some help to solve small issues on the microscope. Let us know, if you have other suggestions.

xxx

Reference material