Specific Process Knowledge/Characterization/AFM: Atomic Force Microscopy/Workspaces

From LabAdviser

Feedback to this page: click here

Roughness measurements High aspect ratio samples Steep steps - but no high aspect ratio Topographic measurement with no or very small steps (<?)

Comparison method 1 and method 2 for the process

Roughness measurements Topographic measurements with no steep steps Steep steps but no high aspect ratio High aspect ratio measurements
Generel description Generel description - Roughness measurements Generel description -
Recommended probes
  • A
  • B
  • A
  • B
Recommended experiment/Workspace
  • A
  • B
  • C
  • A
Substrate size
  • # small samples
  • # 50 mm wafers
  • # 100 mm wafers
  • # 150 mm wafers
  • # small samples
  • # 50 mm wafers
  • # 100 mm wafers
  • # 150 mm wafers
Allowed materials
  • Allowed material 1
  • Allowed material 2
  • Allowed material 1
  • Allowed material 2
  • Allowed material 3


Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/AFM:_Atomic_Force_Microscopy/Workspaces&oldid=16646"