Specific Process Knowledge/Getting Started

The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.

Feedback to this page: click here

THIS PAGE IS UNDER CONSTRUCTION

Getting Started[edit | edit source]

As a new user to DTU Nanolab (and nano- and microfabrication), it might be difficult for you to find a good starting point on how to access our facility. This page is a guideline on how to start your process in our cleanroom. Not all points listed below might be relevant for you. You are always welcome to contact us at nanolabsupport@nanolab.dtu.dk, if you have any questions.

1. Register as user at www.nanolab.dtu.dk
   • Registration in administration system (name, project number, supervisor)
   • Access to relevant Safety Training
   • Log-in data to DTU Learn and labmanger.dtu.dk (DTU Learn and LabManager require login)
   • Access card (DTU personel receives access on their personal DTU cards, external users will receive a DTU access card from DTU Nanolabs administration (building 347)
2. Safety training
   • Complete Online Introductory Course (DTU Learn)
   • Complete Safety hands-on training, if required
3. Create your Fabrication Process Flow
4. Equiment Training
   • Complete online and group hands-on training Tool Package Training (TPT), if required
   • Read manuals
   • Print and laminate your process flow
   • Have substrates ready (or request assistance for purchase)
   • Request hands-on training at training@nanolab.dtu.dk
5. Equipment Booking
   • Book equipment at labmanager.dtu.dk, if authorized
   • Equipment booking for training sessions is commonly booked by the trainer
6. Run the Process Flow