Jump to content

LabAdviser/314/Microscopy 314-307/SEM/Nova/Transmission Kikuchi diffraction: Difference between revisions

Mattod (talk | contribs)
Mattod (talk | contribs)
Line 68: Line 68:
Figures 8 and 9 show the IPFZ maps overlaid with pattern quality for temperatures varying from 20°C to 900°C. A preliminary investigation of the Au film at room temperature revealed a bimodal nanostructure, with the presence of small grains with size in the range of 30 nm and large grains with size in the 150 nm range. The latter ones showed a strong [111] out-of-plane texture. During heating, the [111] grains tended to grow faster than the [110] and [100] ones. It is also possible to observe that grain growth started at a temperature below 150°C, while holes are visible at 170°C (highlighted with a red circle). The holes were formed in the vicinity of non-preferentially oriented (non-PO) [110] and [100] grains, which were also the site where the hole growth was continuing.
Figures 8 and 9 show the IPFZ maps overlaid with pattern quality for temperatures varying from 20°C to 900°C. A preliminary investigation of the Au film at room temperature revealed a bimodal nanostructure, with the presence of small grains with size in the range of 30 nm and large grains with size in the 150 nm range. The latter ones showed a strong [111] out-of-plane texture. During heating, the [111] grains tended to grow faster than the [110] and [100] ones. It is also possible to observe that grain growth started at a temperature below 150°C, while holes are visible at 170°C (highlighted with a red circle). The holes were formed in the vicinity of non-preferentially oriented (non-PO) [110] and [100] grains, which were also the site where the hole growth was continuing.


<gallery widths="700px" heights="700px" perrow="2" halign="center"> image:Picture29.png|Fig. 8: IPFZ maps of the 15 nm Au �lm, overlaid with pattern quality map, recorded at temperatures between 20°C and 240°C.  
<gallery widths="500px" heights="500px" perrow="2" halign="center"> image:Picture29.png|Fig. 8: IPFZ maps of the 15 nm Au �lm, overlaid with pattern quality map, recorded at temperatures between 20°C and 240°C.  
image:Picture30.png|Fig. 9: IPFZ maps of the 15 nm Au �lm, overlaid with pattern quality map, recorded at temperatures between 250°C and 900°C. </gallery>
image:Picture30.png|Fig. 9: IPFZ maps of the 15 nm Au �lm, overlaid with pattern quality map, recorded at temperatures between 250°C and 900°C. </gallery>