Specific Process Knowledge/Thin film deposition/Deposition of Titanium Oxide: Difference between revisions
Jump to navigation
Jump to search
Line 70: | Line 70: | ||
* 1 - 2 Å/s | * 1 - 2 Å/s | ||
| | | | ||
* | * 0.40 nm/min - 0.06 nm/cycle (very recipe and temperature dependent) | ||
|- | |- | ||
Revision as of 11:55, 31 July 2018
Feedback to this page: click here
Deposition of Titanium Oxide
Titanium oxide can be deposited either by a sputter technique or by use of ALD (atomic layer deposition). At the moment the only system where we have a target for Titanium oxide is IBE/IBSD Ionfab300. The target is Ti. During the sputter deposition oxygen is added to the chamber resulting in Titanium oxide on the sample.
Comparison of the methods for deposition of Titanium Oxide
Sputter technique using IBE/IBSD Ionfab300 | Sputter System Lesker | III-V Dielectric evaporator | ALD Picosun 200 | |
---|---|---|---|---|
Generel description |
|
|
|
|
Stoichiometry |
|
|
|
|
Film Thickness |
|
|
|
|
Deposition rate |
|
|
|
|
Step coverage |
|
|
|
|
Process Temperature |
|
|
|
|
More info on TiO2 |
|
|
||
Substrate size |
|
|
|
ALD1:
ALD2:
|
Allowed materials |
|
|
|