Specific Process Knowledge/Lithography/PMMA: Difference between revisions

Revision as of 11:08, 24 January 2018

Feedback to this page: click here

Resist	Polarity	Manufacturer	Comments	Technical reports	Spinner	Thinner	Developer	Rinse	Remover	Process flows (in docx-format)
PMMA	Positive	AllResist	We have various types of PMMA in the cleanroom. Please contact Lithography for information.	MSDS PMMA, Processing guidelines	See table here	Anisole	IPA:H2O (7:3), MIBK:IPA (1:3)	IPA	acetone/1165

Spin Curves

The thickness is measured on VASE Ellipsometer using a simple Cauchy model for a transparent polymer on Si. The measurements are performed at one incidence angle (70 degrees) only. 9 points on each 4" wafer has been measured; the standard deviation thus representing the homogeinity of the film on the 4" wafers.

AllResist AR-P 672.03 (PMMA) (~ 2ml per 4" wafer) spin coated on 'Spin Coater: Manual Standard Resists, E-5, WILTID & TIGRE, 26-10-2015. Softbake 3 min @ 150 degC.
Spin Speed [rpm]	Acceleration [rpm/s]	Thickness [nm]	St Dev
4000	2000	95.55	0.55
5000	2000	85.50	0.92
7000	2000	72.79	1.18

AllResist AR-P 672.03 (PMMA) diluted 1:1 in Anisole (~ 2ml per 4" wafer) spin coated on 'Spin Coater: Manual Standard Resists, E-5, WILTID & TIGRE, 26-10-2015. Softbake 3 min @ 150 degC.
Spin Speed [rpm]	Acceleration [rpm/s]	Thickness [nm]	St Dev
2000	2000	51.37	0.25
3000	2000	41.97	0.24
4000	2000	36.25	0.25
5000	2000	32.42	0.30
6000	2000	30.17	0.29
7000	2000	28.76	0.43

Revision as of 13:59, 23 November 2015 view source Tigre (talk \| contribs) DCH-Employees-701 2,257 edits No edit summary ← Older edit		Revision as of 11:08, 24 January 2018 view source Taran (talk \| contribs) DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, NLAB-Nlab307-labadviser-users-34891 3,292 edits No edit summary Newer edit →
Line 1:		Line 1:

			'''Feedback to this page''': '''[mailto:lithography@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php?title=Specific_Process_Knowledge/Lithography/PMMA click here]'''

	{\|border="1" cellspacing="1" cellpadding="3" style="text-align:left;" width="95%"		{\|border="1" cellspacing="1" cellpadding="3" style="text-align:left;" width="95%"