Jump to content

LabAdviser/Technology Research/Fabrication of Hyperbolic Metamaterials using Atomic Layer Deposition/EMT Procces flow: Difference between revisions

← Older editNewer edit →
VisualWikitext
Eves (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,346 edits
Eves (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers
4,346 edits
Line 76: Line 76:
|Optical microscope inspection
|Optical microscope inspection
|Check the results of the exposure and development with an optical microscope by inspecting that the pattern and alignment marks are clearly visible. Right image: top view of alignment marks. The alignment marks will be used to align the wafer to the mask in next lithography step (section 5).
|Check the results of the exposure and development with an optical microscope by inspecting that the pattern and alignment marks are clearly visible. Right image: top view of alignment marks. The alignment marks will be used to align the wafer to the mask in next lithography step (section 5).
||The different[[Specific_Process_Knowledge/Characterization/XPS#XPS-ThermoScientific|XPS-ThermoScientific]] [[Thin_film_deposition/ALD_Picosun_R200/ALD_multilayers#Investigation_of_chemical_composition_in_multilayers_system| XPS results]] and their features are listed.
||The different [[Specific_Process_Knowledge/Characterization/XPS#XPS-ThermoScientific|XPS-ThermoScientific]] [[Specific_Process_Knowledge/Thin_film_deposition/ALD_Picosun_R200/ALD_multilayers#Investigation_of_chemical_composition_in_multilayers_system| XPS results]] and their features are listed.
  |[[image:mask1_SiO-etch-2.jpg|150x150px|center]]
  |[[image:mask1_SiO-etch-2.jpg|150x150px|center]]
|-
|-
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=LabAdviser/Technology_Research/Fabrication_of_Hyperbolic_Metamaterials_using_Atomic_Layer_Deposition/EMT_Procces_flow"