Specific Process Knowledge/Doping

THIS PAGE IS UNDER CONSTRUCTION

Feedback to this page: click here

Doping your wafer

This page is about doping your wafer or making a thin film layer doped with boron, phosphorous or Germanium.

• Dope with Phosphorous - Doping Silicon wafers with phosphorous by thermal predeposition and drive-in
• Dope with Boron - Doping Silicon wafers with boron by thermal predeposition and drive-in
• Furnace LPCVD PolySilicon - Deposition of PolySi doped with B or P
• PECVD - Making boron glass (BSG), phosphorus glass (PSG), boron-phosphorous glass PBSG or germanium doped glass
• Ion implantation

Comparison of different doping processes

	Phosphorous predep	Boron predep	PECVD doped thin film	Doped Poly Si
Generel description	Dopants introduced by diffusion from gas-phase (POCL)	Dopants introduced by diffusion from solid source wafers	Deposition of doped thin film (oxides or nitrides)	Dopants introduced by in-situ doping of poly/amorphous Si
Process Temperature1	900°C - 1150°C	1050°C - 1125°C	300°C	560°C - 620°C
Dopant	Phosporous (POCL)	Boron (solid source wafers containing B2O3)	Phosphorous (PH3) Boron (B2H6) Germane (GeH4)	Phosphorous (PH3) Boron (B2H6 or BCl3)
Substrate size	100 mm wafers	100 mm wafers	small samples 50 mm wafers 100 mm wafers 150 mm wafers	100 mm wafers (Boron and Phosphorous) 150 mm wafers (only Boron)
Allowed materials	Silicon Poly/amorphous silicon Oxide Nitride	Silicon Poly/amorphous silicon Oxide Nitride	Silicon Poly/amorphous silicon Oxide Nitride	Silicon Poly/amorphous silicon Oxide Nitride

¹ In most cases you need a high temperature step to drive in and redistribute the dopants in the material. This is typically done at 800°C - 1100°C in either high temperature annealing furnaces or by rapid thermal annealing.

Ion implantation

Ion implantation cannot be done at Danchip. IBS offers ion-beam implantation as a service. See more at the homepage of IBS: http://www.ion-beam-services.com/about_us.htm