Specific Process Knowledge/Back-end processing/Laser Micromachining Tool: Difference between revisions
| Line 18: | Line 18: | ||
It is equipped with 2 high power lasers: | It is equipped with 2 high power lasers: | ||
* a 50W picosecond laser that can emit light at 3 wavelengths: 355nm, 532nm and 1064nm (Time-Bandwidth Products, Fuego/Duetto. See some details in this article: [http://www.time-bandwidth.com/upload/press/weingartenlasertechnikjournalvol6issue3p51.pdf] ) | * a 50W picosecond laser that can emit light at 3 wavelengths: 355nm, 532nm and 1064nm (Time-Bandwidth Products, Fuego/Duetto. See some details in this article: [http://www.time-bandwidth.com/upload/press/weingartenlasertechnikjournalvol6issue3p51.pdf] ) with a pulse repetition rate from 200kHz up to 8000kHz. | ||
*: and a | *: and a | ||
* a 100W nanosecond laser with a wavelength of 1064nm (IPG Laser YLP-HP series). | * a 100W nanosecond laser with a wavelength of 1064nm (IPG Laser YLP-HP series) with a pulse repetition rate of 100kHz. | ||
The system is able to produce micro structures in different kinds of materials like metals, ceramics, composite materials, etc. | The system is able to produce micro structures in different kinds of materials like metals, ceramics, composite materials, etc. | ||