Specific Process Knowledge/Thin film deposition/Furnace LPCVD TEOS: Difference between revisions
Line 8: | Line 8: | ||
The LPCVD TEOS has a excellent step coverage and is very good for trench filling. The film thickness is very uniform over the wafer. | The LPCVD TEOS has a excellent step coverage and is very good for trench filling. The film thickness is very uniform over the wafer. | ||
'''The user manual(s), quality control procedure(s) and results, technical information and contact information can be found in LabManager:''' | |||
'''[http://www.labmanager.danchip.dtu.dk/function.php?module=Machine&view=view&mach=85 Bor Drive-in]''' | |||
==Process Knowledge== | ==Process Knowledge== |
Revision as of 14:16, 28 November 2012
LPCVD (Low Pressure Chemical Vapor Deposition) TEOS
Danchip has one LPCVD TEOS furnace (installed in 1995). The furnace is a Tempress horizontal furnace. The process is a batch process, where TEOS can be deposited on up to 15 wafer at a time.
TEOS is a silicon dioxide based on tetraethoxysilane. The reactive gas is TEOS, and the deposition takes place at a temperature of 725 oC. It is possible to anneal the TEOS layer to improve the electrical properties as well as chemical resistance.
The LPCVD TEOS has a excellent step coverage and is very good for trench filling. The film thickness is very uniform over the wafer.
The user manual(s), quality control procedure(s) and results, technical information and contact information can be found in LabManager:
Process Knowledge
Please take a look at the process side for deposition of TEOS oxide:
Deposition of TEOS using LPCVD
Purpose |
Deposition of TEOS - Silicon dioxide based on tetraethoxysilane | |
---|---|---|
Performance | Film thickness |
|
Step coverage |
| |
Film quality |
| |
Process parameter range | Process Temperature |
|
Process pressure |
| |
Gas flows |
| |
Substrates | Batch size |
|
Substrate material allowed |
|