LabAdviser/314/Getting Started: Difference between revisions
No edit summary |
|||
| Line 28: | Line 28: | ||
* Go through these information as well | * Go through these information as well | ||
After successfully finishing a module, you acquire a competence in LabManager which grants access to the equipment training. You can check these competence yourself. | After successfully finishing a module, you acquire a competence in LabManager which grants access to the equipment training and access to the labs. You can check these competence yourself. Some lab access requires an additional in-person introduction. | ||
Access on your DTU access card will be updated within a few days and can be checked in PACE ([https://cardadmin.cas.dtu.dk/ cardadmin.cas.dtu.dk/]). | |||
==Equipment training== | ==Equipment training== | ||
Equipment training typically consists of an introduction lecture and hands-on session on the equipment. The exact procedure depends on the equipment and will be explained during the meeting. | |||
==Access== | ==Access== | ||
After successfully conducting the hands-on training, you will be granted access to the equipment, which can be seen as a competence in LabManager. With the competence the equipment can be booked and operated. Remember the indnividual booking rules for the equipments, which can be found in LabManager. | |||
Revision as of 17:53, 2 July 2026
Getting Started with Electron Microscopy Characterization
For new users at DTU Nanolab - Characterization facilities, we have a process to request access to the Electron Microscopy Facilities B314/307/313.
Have a look on our homepage www.nanolab.dtu.dk/access which describes to possibilities. Additionally, we describe here briefly the steps you need to take.
If you face any issues, you are always welcome to contact us at microscopysupport@nanolab.dtu.dk.
Register
Go to www.nanolab.dtu.dk/access/characterization/electron-microscopy-equipment and send an access request.
- Registration in DTU Nanolabs administration system LabManager (name, project number, supervisor)
- Select equipment to be trained on
- Select user type (internal DTU, external DTU, academic collaboration or commercial work)
- Describe your samples and what you want to learn about it
⇒ Our equipment responsible will get back to you to discuss your request further and arrange training
Lab-introduction course
After meeting with the equipment responsible, follow the link in the access request autoreply email to DTU Learn and go through the Lab-Introduction course "DTU Nanolab - Introduction course for Nanolab facilitiy (NOT Cleanroom in B346)" (the course describes what steps you need to take)
- Click on the icon "Content" at the top and go through all information in the module Mandatory study material and quiz
- Finish the module by passing the quizzes Lab-intro test and Access agreement under Quiz mandatory
- After successfully finishing Quiz mandatory, go to the module After completing the mandatory study material and quiz and select Building B314/B307/B313 and General access to B314/B307/B313 in the Follow-up course checklist
- Go the the information in the module Access to building B314/B307/B313 and pass the quiz Quiz access B314/B307 under Overall Risk Assessment
- If access to a specific lab is required, select the work environment in the Follow-up course checklist under Final
- Go through these information as well
After successfully finishing a module, you acquire a competence in LabManager which grants access to the equipment training and access to the labs. You can check these competence yourself. Some lab access requires an additional in-person introduction.
Access on your DTU access card will be updated within a few days and can be checked in PACE (cardadmin.cas.dtu.dk/).
Equipment training
Equipment training typically consists of an introduction lecture and hands-on session on the equipment. The exact procedure depends on the equipment and will be explained during the meeting.
Access
After successfully conducting the hands-on training, you will be granted access to the equipment, which can be seen as a competence in LabManager. With the competence the equipment can be booked and operated. Remember the indnividual booking rules for the equipments, which can be found in LabManager.