LabAdviser/314/Microscopy 314-307/FIB/Hydra: Difference between revisions

@@ Line 58: / Line 58: @@
 =Important Notes=
+* ALWAYS make sure the EDS (and EBSD '''relevant?''') detectors are RETRACTED when opening and closing the chamber.
+* Do NOT adjust the Nitrogen regulator!!! ''' Relevant?'''
+* Always open and close the chamber GENTLY whilst viewing the live CCD image.
+* Only home the stage with open door or if in vacuum only with holders that you are 100% sure it is safe to do so.
+* Make sure you delete all saved positions before finishing your microscope section.
+* When moving between saved positions, BE CAREFUL! If you are unsure move the Z height to the lowest point and lock it so as not to collide with the pole piece.
+* Use the logbook
+* NEVER work without a valid link between the Z and the FWD
+* ONLY INSERT EBSD CAMERA if the sample is at the correct position (in case of a special EBSD holder the stage must be tilted to 16 °). '''Relevant?'''
+* Always use GLOVES. Only vacuum-ready samples and holders are allowed inside the chamber.
+* DO NOT install ANY software on either the microscope or support PC,.
+* Transfer your files at the end of each session.  We will be deleting files from the support computer without notice.
 =Who may operate Helios 5 Hydra UX DualBeam=