Jump to content

Specific Process Knowledge/Characterization/AFM: Atomic Force Microscopy/Workspaces: Difference between revisions

← Older editNewer edit →
VisualWikitext
Bghe (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, Bureaucrats, Administrators
7,317 edits
Bghe (talk | contribs)
DCH-Employees-701, NLAB-Employees-701, NLAB-LabmanagerAllUsers, Bureaucrats, Administrators
7,317 edits
Line 18: Line 18:
|-style="background:WhiteSmoke; color:black"
|-style="background:WhiteSmoke; color:black"
!Recommended mode
!Recommended mode
|Roughness measurement can be done in both Contact, Tapping and ScanAsyst mode. We recommend '''ScanAsyst mode''' because of less chance of (non-uniform) deformation of the sample and less tip wear - and because of ease of use.
|Roughness measurement can be done in both Contact, Tapping and ScanAsyst mode. We recommend '''ScanAsyst mode''' because of less chance of (non-uniform) deformation of the sample and less tip wear - and because of ease of use. However it also works fine in tapping mode.
|For Topographic measurements with no steep/abrupt steps we also recommend '''ScanAsyst mode''' due to less chance of (non-uniform) deformation of the sample and less tip wear - and because of ease of use.  
|For Topographic measurements with no steep/abrupt steps we also recommend '''ScanAsyst mode''' due to less chance of (non-uniform) deformation of the sample and less tip wear - and because of ease of use.  
|For Steep/abrupt steps but no high aspect ratio structures we still recommend '''ScanAsyst mode''' due to ease of use and lower tip wear.  
|For Steep/abrupt steps but no high aspect ratio structures we still recommend '''Tapping mode''' or '''ScanAsyst mode" .  
|For High aspect ratio measurements we recommend Tapping mode. There is not yet a ScanAsyst probe developed for high aspect ratio. Therefore we recommend '''Tapping mode'''.
|For High aspect ratio measurements we recommend Tapping mode. There is not yet a ScanAsyst probe developed for high aspect ratio. Therefore we recommend '''Tapping mode'''.
|-
|-
Line 27: Line 27:
|-style="background:LightGrey; color:black"
|-style="background:LightGrey; color:black"
!Recommended probes
!Recommended probes
|'''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]'''
|'''[https://www.nanoandmore.com/AFM-Probe-Tap150Al-G Tap150Al-G]''' or '''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]'''
|'''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]'''
|'''[https://www.nanoandmore.com/AFM-Probe-Tap150Al-G Tap150Al-G]''' or '''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]'''
|'''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]''' for ScanAsyst mode
|'''[https://www.nanoandmore.com/AFM-Probe-Tap150Al-G Tap150Al-G]''' or '''[http://www.brukerafmprobes.com/p-3726-scanasyst-air.aspx ScanAsyst in air]''' for ScanAsyst mode
'''[http://www.nanoandmore.com/AFM-Probe-Tap300Al-G TAP300Al-G]''' for Tapping mode
'''[https://www.nanoandmore.com/AFM-Probe-Tap150Al-G Tap150Al-G]''' or '''[http://www.nanoandmore.com/AFM-Probe-Tap300Al-G TAP300Al-G]''' for Tapping mode
|'''[http://www.nanoandmore.com/AFM-Probe-AR5T-NCHR AR5T-NCHR]'''
|'''[http://www.nanoandmore.com/AFM-Probe-AR5T-NCHR AR5T-NCHR]''' or
'''[http://www.brukerafmprobes.com/p-3679-fib6-400a.aspx FIB6-400A]'''
'''[http://www.brukerafmprobes.com/p-3679-fib6-400a.aspx FIB6-400A]'''
|-
|-
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/AFM:_Atomic_Force_Microscopy/Workspaces"