LabAdviser/314/Preparation 314-307: Difference between revisions
| Line 210: | Line 210: | ||
Our RMC MT-7 Microtome is a vintage piece of equipment and can be used for planning specimens for SEM/EDX and/or for cutting relative thin slices (approx. 200nm thick) for TEM. First, the specimen needs to be embedded into a resin or an epoxy, and then can be sliced with a glass or diamond knife. At DTU Nanolab Cen we can offer only glass knifes. The Risk Assessment for the RMC MT-7 Microtome can be found here [[:File:APV RMC Microtome.pdf]] | Our RMC MT-7 Microtome is a vintage piece of equipment and can be used for planning specimens for SEM/EDX and/or for cutting relative thin slices (approx. 200nm thick) for TEM. First, the specimen needs to be embedded into a resin or an epoxy, and then can be sliced with a glass or diamond knife. At DTU Nanolab Cen we can offer only glass knifes. The Risk Assessment for the RMC MT-7 Microtome can be found here [[:File:APV RMC Microtome.pdf]] | ||
The RMC MT-7 Microtome is located in building 314, in the Soft Mater (toxic) Lab. For further information on the machine usage contact: ramona.mateiu@cen.dtu.dk. | The RMC MT-7 Microtome is located in building 314, in the Soft Mater (toxic) Lab. For further information on the machine usage contact: ramona.mateiu@cen.dtu.dk. | ||
[[File: RMC Microtome.jpg|200px|thumb|left|DTU | [[File: RMC Microtome.jpg|200px|thumb|left|DTU Nanolab Cen RMC MT-7 Microtome]] | ||
<br clear="all" /> | <br clear="all" /> | ||