Specific Process Knowledge/Etch/III-V ICP/InP-InGaAsP-InGaAs: Difference between revisions
| Line 99: | Line 99: | ||
<gallery caption="Result of changing the Cl2/N2 ratio." widths="500px" heights="400px" perrow="3"> | <gallery caption="Result of changing the Cl2/N2 ratio." widths="500px" heights="400px" perrow="3"> | ||
Image:S0_oxide_05.jpg|Top view of the oxide mask before etching. It is the TRAVKA50 mask, but it is clear that the CD reduction is about the 1-1.5 µm of the lines. | Image:S0_oxide_05.jpg|Sample S0: Top view of the oxide mask before etching. It is the TRAVKA50 mask, but it is clear that the CD reduction is about the 1-1.5 µm of the lines. | ||
Image:S4_06.jpg|Profile view. The recipe InP etch has been used. <br> The sample has been run on a SiO2 carrier wafer. <br> There is not much CD change compared to the oxide mask before the etch. <br> It seems like the SiO2 mask is gone and the sidewall angle from the mask has been transferred into the sample. <br> | Image:S4_06.jpg|Sample S4: Profile view. The recipe InP etch has been used. <br> The sample has been run on a SiO2 carrier wafer. <br> There is not much CD change compared to the oxide mask before the etch. <br> It seems like the SiO2 mask is gone and the sidewall angle from the mask has been transferred into the sample. <br> The sidewall profile is quit vertical in the lower part. | ||
Image:S5_05.jpg|Profile view. The recipe InP etch has been used but with modified Cl2 and N2 flows: N"=30 sccm Cl2=30 sccm. <br> The sample has been run on a SiO2 carrier wafer. <br> There is not much CD change compared to the oxide mask before the etch. <br> It seems like the SiO2 mask is gone. <br> the sidewall profile is overcutting probably due to too little passivation. | Image:S5_05.jpg|Sample S5: Profile view. The recipe InP etch has been used but with modified Cl2 and N2 flows: N"=30 sccm Cl2=30 sccm. <br> The sample has been run on a SiO2 carrier wafer. <br> There is not much CD change compared to the oxide mask before the etch. <br> It seems like the SiO2 mask is gone. <br> the sidewall profile is overcutting probably due to too little passivation. | ||
Image:none | |||
Image:S4_30dg_2_05.jpg|Sample S4: The sidewall roughness on the sample S4 is quit high | |||
Image:S5_30dg_01.jpg|Sample S5: The sidewall roughness on the sample S5 is quit low. | |||
</gallery> | </gallery> | ||