Specific Process Knowledge/Characterization/AFM: Atomic Force Microscopy/Workspaces: Difference between revisions

From LabAdviser
Bghe (talk | contribs)
Created page with "Roughness measurements High aspect ratio samples Steep steps - but no high aspect ratio Topographic measurement with no or very small steps (<?) ==Comparison method 1 and met..."
 
Bghe (talk | contribs)
No edit summary
Line 1: Line 1:
'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Characterization/AFM:_Atomic_Force_Microscopy/Workspaces click here]'''
Roughness measurements
Roughness measurements
High aspect ratio samples
High aspect ratio samples

Revision as of 09:18, 21 October 2014

Feedback to this page: click here

Roughness measurements High aspect ratio samples Steep steps - but no high aspect ratio Topographic measurement with no or very small steps (<?)

Comparison method 1 and method 2 for the process

Roughness measurements Topographic measurements with no steep steps Steep steps but no high aspect ratio High aspect ratio measurements
Generel description Generel description - Roughness measurements Generel description -
Recommended probes
  • A
  • B
  • A
  • B
Recommended experiment/Workspace
  • A
  • B
  • C
  • A
Substrate size
  • # small samples
  • # 50 mm wafers
  • # 100 mm wafers
  • # 150 mm wafers
  • # small samples
  • # 50 mm wafers
  • # 100 mm wafers
  • # 150 mm wafers
Allowed materials
  • Allowed material 1
  • Allowed material 2
  • Allowed material 1
  • Allowed material 2
  • Allowed material 3