Latest revision as of 07:46, 1 February 2023

Feedback to this page: click here

Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.

The Cleaver: FlexScribe

The Cleaver: FlexScribe is a scriber designed for cleaving/scribing large wafers into smaller pieces from the frontside. Hence it will leave particles on the frontside of the sample. It works by running a "pizza wheel" over the sample and then breaking it in two by using a pair of pliers.

The equipment is placed in the left drawer underneath fumehood 5: Special purposes. When operated the the Cleaver: Flex Scribe should always be placed inside Fume hood 5.

Approved Materials:

Si
Quartz
Pyrex (Borofloat 33)
GaAs
InP
Sapphire

The Flex Scribe can cleave samples from 150mm down to ~10mm, please contact wetchemistry group for more information

DTU-Nanolab has 3 different types of Cleavers see the Labadviser pages for the FlipScribe and the LatticeAxe for more information.

@@ Line 1: / Line 1: @@
 '''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/Specific_Process_Knowledge/Back-end_processing/FlexScribe click here]'''
+'''Unless anything else is stated, everything on this page, text and pictures are made by DTU Nanolab.'''
+=The Cleaver: FlexScribe=
 The Cleaver: FlexScribe is a scriber designed for cleaving/scribing large wafers into smaller pieces from the frontside. Hence it will leave particles on the frontside of the sample. It works by running a "pizza wheel" over the sample and then breaking it in two by using a pair of pliers.