Specific Process Knowledge/Etch/DRIE-Pegasus/Pegasus-4: Difference between revisions
| (32 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
[[Category: Equipment |Etch DRIE]] | [[Category: Equipment |Etch DRIE]] | ||
[[Category: Etch (Dry) Equipment|DRIE]] | [[Category: Etch (Dry) Equipment|DRIE]] | ||
<br> {{CC1}} | |||
==Pegasus 4 - 150mm silicon oxide and silicon nitride etching== | ==Pegasus 4 - 150mm silicon oxide and silicon nitride etching== | ||
[[Image:Peg3and4 front 2.JPG |frame|right|x250px|The DRIE-Pegasus3 and DRIE-Pegasus4 operator station and cassette loading stations, {{photo1}}]] | |||
DRIE-Pegasus 4 is dedicated Silicon oxide and Silicon nitride etching. It is originally designed for silicon etching but gas mass flow controllers has been changed to optimize silicon oxide and silicon nitride etching. The system is setup for 6" wafers. Sampler samples has to be bonded to a 6" carrier to be etched in the system. | |||
'''The user manual and contact information can be found in LabManager:''' | |||
[ | <!-- give the link to the equipment info page in LabManager: --> | ||
[http://labmanager.dtu.dk/function.php?module=Machine&view=view&mach=456 DRIE Pegasus 4 in LabManager - requires login] | |||
== Process information == | |||
'''Standard recipes''' | |||
*[[/Barc Etch|Barc Etch]] | |||
*[[/SiO2 Etch|SiO2 Etch]] | |||
*[[/Nitride Etch|Nitride etch with SiO2 etch recipes]] | |||
*[[/Slow etch|Slow etch of silicon nitride and silicon oxide]] | |||
=== Wafer bonding === | |||
To find information on how to bond wafers or chips to a carrier wafer, click [[Specific Process Knowledge/Etch/DryEtchProcessing/Bonding| here]]. | |||
Latest revision as of 10:38, 22 August 2023
Feedback to this page:
click here
Unless otherwise stated, this page is written by DTU Nanolab internal
Pegasus 4 - 150mm silicon oxide and silicon nitride etching
DRIE-Pegasus 4 is dedicated Silicon oxide and Silicon nitride etching. It is originally designed for silicon etching but gas mass flow controllers has been changed to optimize silicon oxide and silicon nitride etching. The system is setup for 6" wafers. Sampler samples has to be bonded to a 6" carrier to be etched in the system.
The user manual and contact information can be found in LabManager:
DRIE Pegasus 4 in LabManager - requires login
Process information
Standard recipes
- Barc Etch
- SiO2 Etch
- Nitride etch with SiO2 etch recipes
- Slow etch of silicon nitride and silicon oxide
Wafer bonding
To find information on how to bond wafers or chips to a carrier wafer, click here.