Latest revision as of 12:33, 22 September 2026

The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.

Feedback to this page: click here

Access to software

We have a couple of workstations available with relevant software installed. These can be accessed via remote.dtu.dk (DTUs Citrix remote system).

Before being able to access, you need to write a mail to jenk@dtu.dk.

After you are added to the access list, follow the guide:

Computer

Nlab-Ultra-data:

Mainly for Spectra Ultra user. TFS tomography software, Digital Micrograph and Velox

EDAX-OIM:

EBSD/TKD user of Oxford and EDAX system. Aztec, Esprit and OIM.

LAB-CZC4522XC3 and LAB-CZC72977HQ:

General users. Aztec, Digital micrograph, Velox

Available software for post-processing

The following software is installed on the different workstations:

Gatan GMS v3 (TEM/STEM image processing and analysis)

ThermoFisher Velox (TEM/STEM image and EDS processing and analysis)

ThermoFisher TIA v4.19 (TEM/STEM image processing and analysis)

Oxford AZtec v6 (EDS and EBSD analysis)

EDAX OIM v9 (EBSD analysis)

Bruker Esprit v2 (EDS and EBSD analysis)

ThermoFisher Avizo (3D rendering)

Crystalmaker v11 (Crystal structure building)

Crystaldiffract v7 (Diffraction analysis)

Inspect 3D (Tomography reconstruction)

Additionally, there is one workstation available in the lobby of 314. This has mainly Oxford Aztec available.

Please remember to log out when you have finished your work. Do not turn off the workstations.

@@ Line 1: / Line 1: @@
-'''Feedback to this page''': '''[mailto:labadviser@danchip.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.danchip.dtu.dk/index.php/LabAdviser/CEN/Post_Processing click here]'''
+<!-- <span style="background:#FF2800">THIS PAGE IS UNDER CONSTRUCTION</span>[[image:Under_construction.png|200px]] -->
+{{cc-nanolab}}
-At DTU Cen you will find a small PC lab where there is access to all the processing and productivity software available at DTU Cen. The lab is located in building 307 room 101.There are five workstations which you can access with your DTU credentials. The following software is installed on all workstations:
+'''Feedback to this page''': '''[mailto:labadviser@nanolab.dtu.dk?Subject=Feed%20back%20from%20page%20http://labadviser.nanolab.dtu.dk/index.php/LabAdviser/314/Microscopy_314-307/Postprocessing click here]'''
-Microsoft Office 2010
+[[Category:314]]
+[[Category:314-Microscopy]]
+<br>
+<br>
+= Access to software =
-Digital Micrograph v1.85 (TEM image processing and analysis)
+We have a couple of workstations available with relevant software installed. These can be accessed via [https://remote.dtu.dk remote.dtu.dk] (DTUs Citrix remote system).
-TIA v4.7 SP2 (TEM/STEM image processing and analysis) (ask Cen staff for access)
+Before being able to access, you need to write a mail to jenk@dtu.dk.
-JEMS v4.3905 (TEM/STEM/Diffraction analysis and simulation)
+After you are added to the access list, follow the guide:
-AZtec v3.1b (SEM and TEM) (EDX spectrum and map analysis)
+[[File:Citrix login.png|400px|thumb|left|Go to https://remote.dtu.dk and login with your DTU credentials]] <br clear="all" />
-INCA v5.0.5 (EDX analysis)
+[[File:Citrix Apps.png|400px|thumb|left|Go to "Apps" and find the remote computers (marked with red circle in the image)]] <br clear="all" />
-Avizo v9.0.1 (3D rendering)
+[[File:Citrix_computer-login.png|200px|thumb|left|Login with your DTU credentials]] <br clear="all" />
-Crystalmaker v9.2.7 (Crystal structure building)
+[[File:Citrix sign-out.png|400px|thumb|left|Remember to Sign out when done with the work. Don't save data on these PCs; all saved data during the session should be removed at the end of the session.]] <br clear="all" />
-Crystaldiffract v6.5.5 (Diffraction analysis)
+= Computer =
+* Nlab-Ultra-data: </br>
+Mainly for Spectra Ultra user.
+TFS tomography software, Digital Micrograph and Velox
-Single crystal v2.3.3 (Diffraction from single crystals)
+* EDAX-OIM: </br>
+EBSD/TKD user of Oxford and EDAX system. Aztec, Esprit and OIM.
-Additionally, some of the workstations have node-locked licenses to:
-PANalytical X’pert Highscore Plus (XRD data analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke
+* LAB-CZC4522XC3 and LAB-CZC72977HQ: </br>
+General users. Aztec, Digital micrograph, Velox
-Inspect 3D (Tomography reconstruction): Cen-Himmelbjerg, Cen-Froebjerg
-TrueImage v2.0.1 (TEM image reconstruction): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding
+= Available software for post-processing =
-Esprit 2.0 (EBSD analysis): Cen-Himmelbjerg, Cen-Froebjerg, Cen-Valbybakke, Cen-Yding
+The following software is installed on the different workstations:
+Gatan GMS v3 (TEM/STEM image processing and analysis)
+ThermoFisher Velox (TEM/STEM image and EDS processing and analysis)
+ThermoFisher TIA v4.19 (TEM/STEM image processing and analysis)
+Oxford AZtec v6 (EDS and EBSD analysis)
+EDAX OIM v9 (EBSD analysis)
+Bruker Esprit v2 (EDS and EBSD analysis)
+ThermoFisher Avizo (3D rendering)
+Crystalmaker v11 (Crystal structure building)
+Crystaldiffract v7 (Diffraction analysis)
+Inspect 3D (Tomography reconstruction)
+Additionally, there is one workstation available in the lobby of 314. This has mainly Oxford Aztec available.
 Please remember to log out when you have finished your work. Do not turn off the workstations.