Specific Process Knowledge/Thermal Process: Difference between revisions
| (4 intermediate revisions by the same user not shown) | |||
| Line 16: | Line 16: | ||
'''A stack furnaces:''' | '''A stack furnaces:''' | ||
*[[/A1 Bor Drive-in furnace|Boron Drive-in + Predep furnace (A1)]] - ''For oxidation and annealing of Si wafers, and for boron pre-deposition (doping) and for drive-in afterwards'' | *[[/A1 Bor Drive-in furnace|Boron Drive-in + Predep furnace (A1)]] - ''For oxidation and annealing of Si wafers, and for boron pre-deposition (doping) and for drive-in afterwards'' | ||
*[[/A2 Gate Oxide furnace|Gate Oxide furnace (A2)]] - For dry oxidation of Si | *[[/A2 Gate Oxide furnace|Gate Oxide furnace (A2)]] - ''For dry oxidation of Si wafers'' | ||
*[[/A3 Phosphor Drive-in furnace|Phosphorus Drive-in furnace (A3)]] - ''For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep'' | *[[/A3 Phosphor Drive-in furnace|Phosphorus Drive-in furnace (A3)]] - ''For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep'' | ||
*[[/A4 Phosphor Pre-dep furnace|Phosphorus Predep furnace (A4)]] - ''For pre-deposition (doping) of phosphorus on Si wafers'' | *[[/A4 Phosphor Pre-dep furnace|Phosphorus Predep furnace (A4)]] - ''For pre-deposition (doping) of phosphorus on Si wafers'' | ||
| Line 22: | Line 22: | ||
'''C stack furnaces:''' | '''C stack furnaces:''' | ||
*[[/C1 Furnace Anneal-oxide|Anneal-oxide furnace (C1)]] - ''For oxidation and annealing of 100 mm and 150 mm wafers'' | *[[/C1 Furnace Anneal-oxide|Anneal-oxide furnace (C1)]] - ''For oxidation and annealing of 100 mm and 150 mm wafers'' | ||
*[[/C2 Furnace | *[[/C2 Furnace General Purpose Annealing|General Purpose Annealing furnace (C2)]] - ''For annealing of different samples and materials.'' | ||
*[[/C3 Anneal-bond furnace|Anneal-bond furnace (C3)]] - ''For oxidation and annealing of bonded wafers'' | *[[/C3 Anneal-bond furnace|Anneal-bond furnace (C3)]] - ''For oxidation and annealing of bonded wafers'' | ||
*[[/C4 Aluminium Anneal furnace|Aluminium Anneal furnace (C4)]] - ''For annealing and oxidation of wafers containing e.g. aluminium, Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> '' | *[[/C4 Aluminium Anneal furnace|Aluminium Anneal furnace (C4)]] - ''For annealing and oxidation of wafers containing e.g. aluminium, Al<sub>2</sub>O<sub>3</sub> and TiO<sub>2</sub> '' | ||
Latest revision as of 13:01, 27 May 2025
The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.
Feedback to this page: click here
Choose a process type
- Oxidation - Grow a thermal oxide on silicon
- Annealing
- Doping with Boron
- Doping with Phosphorus
- Resist pyrolysis
Choose an equipment to use
A stack furnaces:
- Boron Drive-in + Predep furnace (A1) - For oxidation and annealing of Si wafers, and for boron pre-deposition (doping) and for drive-in afterwards
- Gate Oxide furnace (A2) - For dry oxidation of Si wafers
- Phosphorus Drive-in furnace (A3) - For oxidation and annealing of Si wafers and for drive-in after phosphorus pre-dep
- Phosphorus Predep furnace (A4) - For pre-deposition (doping) of phosphorus on Si wafers
C stack furnaces:
- Anneal-oxide furnace (C1) - For oxidation and annealing of 100 mm and 150 mm wafers
- General Purpose Annealing furnace (C2) - For annealing of different samples and materials.
- Anneal-bond furnace (C3) - For oxidation and annealing of bonded wafers
- Aluminium Anneal furnace (C4) - For annealing and oxidation of wafers containing e.g. aluminium, Al2O3 and TiO2
E stack furnaces:
- Oxidation (8") furnace (E1) - For oxidation and annealing of 150 mm and 200 mm wafers
Other furnaces:
- Resist Pyrolysis (former Multipurpose Anneal) furnace - For mainly resist pyrolysis
- RTP2 Jipelec - For rapid thermal annealing of III-V materials, Si-based materials and some metals
- RTP Annealsys - For rapid thermal annealing, rapid thermal oxidation and smoothing of Si-based materials.
- BCB Curing oven - For resist curing and metal alloyinglayers
Rules for storage and RCA cleaning of wafers to the A and C stack furnaces
Manual for the furnace computer to the A, B, C and E stack furnaces
The A, B, C and E stack furnaces can be controlled either from a touch screen by each furnace or from a furnace computer. The user manual for the furnace computer can be found here in LabManager (login required):
Decommissioned equipment
- RTP Jipelec - For rapid thermal annealing of III-V materials and Si-based materials
- APOX furnace - For growing of very thick oxide layers
- III-V Oven (D4) - For oxidation of AlxGaAs layers.
- Old Resist Pyrolysis furnace - For pyrolysis of different resist
- Noble furnace - For annealing and oxidation of non-clean wafers