View source for Specific Process Knowledge/Getting Started

[[Category:346]]
=Getting Started with Cleanroom Fabrication (and Characterization)=
As a new user to DTU Nanolab (and nano- and microfabrication), it might be difficult for you to find a good starting point on how to access our facility. This page is a guideline on how to start your process in our cleanroom. Not all points listed below might be relevant for you. You are always welcome to contact us at [mailto:nanolabsupport@nanolab.dtu.dk nanolabsupport@nanolab.dtu.dk], if you have any questions.
<br>
<br>
# '''Register''' as user at [https://www.nanolab.dtu.dk/access www.nanolab.dtu.dk/access]
#* Registration in DTU Nanolabs administration system (name, project number, supervisor)
#* Access to relevant [[LabAdviser/Safety|Safety Training]]
#* Log-in data to [https://learn.inside.dtu.dk/ DTU Learn] and [https://labmanager.dtu.dk/ labmanger.dtu.dk] 
#* Access card (''DTU personel receives access on their personal DTU cards, external users will receive a DTU access card from DTU Nanolabs administration (building 347''))<br><br>
# '''Complete Safety training'''
#* [[LabAdviser/Safety#Introductory Courses to Facilities at DTU Nanolab|Online Introductory Course]] (''on DTU Learn'') <br>(''incl Introduction to LabAdviser and [[LabAdviser/LabManager|'''LabManager''']]'')
#* Safety hands-on training, ''if required''<br><br>
# '''Create your Fabrication Process'''
#* Choose [[Specific Process Knowledge/Process Flow#Substrate|Substrate]]
#* Define [[Specific Process Knowledge/Process Flow|Process Flow]]
#* Verify that [[Specific Process Knowledge/Cross Contamination|Cross Contamination]] is not an issue in your process
#* ''Optional: Process Flow review by Fabrication Support''<br><br>
# '''Equiment Training'''
#* Online and Group Hands-on training [[LabAdviser/Courses|Tool Package Training (TPT)]], ''if required''
#* Request hands-on training at [Mailto:training@nanolab.dtu.dk training@nanolab.dtu.dk]  
#*''Provide information relevant to your training: Sample (material, size), contamination from previous processes, process and parameters for equipment training
#*''Attach your process flow to the request (if possible)''
#* Read manuals
#* Print and laminate your process flow
#* Have substrates ready (or request assistance for purchase)<br><br>
# '''Equipment Booking'''
#* Book equipment at [https://labmanager.dtu.dk/ labmanager.dtu.dk], ''if authorized''
#* Equipment booking for training sessions is commonly booked by the trainer <br><br>
# '''Run the Process Flow''' 
#* [[Specific Process Knowledge/Wafer Information#How to Purchase Wafers|Purchase your wafer]] or [[Specific Process Knowledge/Wafer cleaning/Bring samples into cleanroom|Bring your samples into the cleanroom]], ''if relevant''
#* Log into one of the available cleanroom computer with your credentials
#* Log into [https://labmanager.dtu.dk/ labmanger.dtu.dk] using the same credentials
#* Start usage
#* Log process under ''process log''
#* Stop usage <br><BR>
Please note that almost all machines at DTU Nanolab are equipped with a labmanager lock. More information on how to use LabManager and how the LabManager Lock (LM-lock) works can be found [[LabAdviser/LabManager|'''here''']] or in the DTU Learn introductory course.
<br>
<br>
=== Shelf Space inside the Cleanroom ===
There is very limited space for storage of samples inside the cleanroom. Commonly each research group working in the cleanroom has been assigned shelf space for the group members to share. If you are not part of a research group, spaces are filled up, or you else require shelf space, please contact our administration or the [mailto:nanolabsupport@nanolab.dtu.dk Fabrication Support Team].