Specific Process Knowledge/Pattern Design/Travka/fields/Aline

From LabAdviser

Feedback to this page: click here

Unless otherwise stated, the content of this page was created by the dry etch group at DTU Nanolab

The A-line field

Definition of the measures used in the table below

The A-line fields have trenches of different widths across the entire 1 cm height of the field. The pitch of the trenches is matched to the exposed area of each mask. The list of trench widths in each field is the same on all masks (due to the high exposed area the widths 2 and 3 µm are missing on the travka 65 mask, on the 80 mask the lines 2, 3, 4 and 6 are missing).

The A-line fields are located along a cleavage line on the wafer with T-ridge fields. Cleaving across these two types of fields provide the possibility of inspecting trench depths and widths as a function of exposed area.


Travka 05 A-line field

Travka 05: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 38 40 2 80
3 57 60 3 180
4 76 80 2 160
6 114 120 1 120
8 152 160 1 160
10 190 200 1 200
15 285 300 1 300
25 475 500 1 500
Travka 05: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 760 800 1 800
50 950 1000 1 1000
75 1425 1500 1 1500
100 1900 2000 1 2000
150 2850 3000 1 3000
200 3800 4000 1 4000
300 5700 6000 1 6000

Travka 10 A-line field

Travka 10: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 18 20 25 500
3 27 30 30 900
4 36 40 30 1200
6 54 60 10 600
8 72 80 10 800
10 90 100 10 1000
15 135 150 5 750
25 225 250 5 1250
Travka 10: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 360 400 5 2000
50 450 500 2 1000
75 675 750 2 1500
100 900 1000 2 2000
150 1350 1500 1 1500
200 1800 2000 1 2000
300 2700 3000 1 3000


Travka 20 A-line field

Travka 20: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 8 10 50 500
3 12 15 60 900
4 16 20 60 1200
6 24 30 20 600
8 32 40 20 800
10 40 50 20 1000
15 60 75 10 750
25 100 125 10 1250
Travka 20: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 160 200 10 2000
50 200 250 4 1000
75 300 375 4 1500
100 400 500 4 2000
150 600 750 2 1500
200 800 1000 2 2000
300 1200 1500 2 3000

Travka 35 A-line field

Travka 35: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 3,7 5,7 80 457,1
3 5,6 8,6 80 685,7
4 7,4 11,4 61 697,1
6 11,1 17,1 51 874,3
8 14,9 22,9 50 1142,9
10 18,6 28,6 50 1428,6
15 27,9 42,9 20 857,1
25 46,4 71,4 20 1428,6
Travka 35: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 74,3 114,3 20 2285,7
50 92,9 142,9 10 1428,6
75 139,3 214,3 10 2142,9
100 185,7 285,7 10 2857,1
150 278,6 428,6 2 857,1
200 371,4 571,4 2 1142,9
300 557,1 857,1 2 1714,3


Travka 50 A-line field

Travka 50: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 2 4 145 580
3 3 6 150 900
4 4 8 140 1120
6 6 12 50 600
8 8 16 50 800
10 10 20 50 1000
15 15 30 25 750
25 25 50 25 1250
Travka 50: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 40 80 25 2000
50 50 100 10 1000
75 75 150 10 1500
100 100 200 10 2000
150 150 300 5 1500
200 200 400 5 2000
300 300 600 5 3000

Travka 65 A-line field

Travka 65: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 1,1 3,1 0 0
3 1,6 4,6 0 0
4 2,2 6,2 144 892,8
6 3,2 9,2 120 1104
8 4,3 12,3 100 1230
10 5,4 15,4 100 1540
15 8,1 23,1 25 577,5
25 13,5 38,5 25 962,5
Travka 65: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 21,5 61,5 25 1537,5
50 26,9 76,9 12 922,8
75 40,4 115,4 12 1384,8
100 53,8 153,8 12 1845,6
150 80,8 230,8 8 1846,4
200 107,7 307,7 8 2461,6
300 161,5 461,5 8 3692

Travka 80 A-line field

Travka 80: A-line 2 µm to 25 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
2 0,5 2,5 0 0
3 0,8 3,8 0 0
4 1,0 5 0 0
6 1,5 7,5 0 0
8 2,0 10 96 960
10 2,5 12,5 90 1125
15 3,8 18,8 80 1504
25 6,3 31,3 50 1565
Travka 80: A-line 40 µm to 300 µm fields
Trench width (µm) Ridge width (µm) Period width (µm) Total periods Width of array (µm)
40 10,0 50 50 2500
50 12,5 62,5 15 937,5
75 18,8 93,8 15 1407
100 25,0 125 15 1875
150 37,5 187,5 10 1875
200 50,0 250 10 2500
300 75,0 375 10 3750