Specific Process Knowledge/Etch/Etching of Aluminium
< Specific Process Knowledge | Etch
Jump to navigation
Jump to search
Revision as of 12:46, 12 March 2013 by BGE (talk | contribs) (→Comparison methode 1 and methode 2 for the process)
Feedback to this page: click here
THIS PAGE IS UNDER CONSTRUCTION![Under construction.png](/images/thumb/f/f8/Under_construction.png/200px-Under_construction.png.jpeg)
Etching of Aluminium
Etching of aluminium can be done either by wet etch, dry etch or by sputtering with ions.
Comparison methode 1 and methode 2 for the process
Al wet etch 1 | Al wet etch 2 | Al etch by ICP metal | Al sputtering by IBE (Ionfab300+) | |
---|---|---|---|---|
Generel description | Wet etch of pure Al | Wet etch of Al + 1.5% Si | Dry plasma etch of Al | Sputtering of Al - pure physical etch |
Parameter 1 |
|
| ||
Parameter 2 |
|
| ||
Substrate size |
|
| ||
Allowed materials |
|
|