Specific Process Knowledge/Etch/Etching of Aluminium

Feedback to this page: click here

THIS PAGE IS UNDER CONSTRUCTION

Etching of Aluminium

Etching of aluminium can be done either by wet etch, dry etch or by sputtering with ions.

• Etching of Al by wet etch
• Etching of Al by dry etch
• IBE/IBSD Ionfab 300

Comparison methode 1 and methode 2 for the process

	Methode 1	Methode 2
Generel description	Generel description - methode 1	Generel description - methode 2
Parameter 1	A B	A B
Parameter 2	A B C	A
Substrate size	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers	# small samples # 50 mm wafers # 100 mm wafers # 150 mm wafers
Allowed materials	Allowed material 1 Allowed material 2	Allowed material 1 Allowed material 2 Allowed material 3