Specific Process Knowledge/Characterization/Probe station
The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.
Feedback to this page: click here
Probe Station
The Probe station is a - EPS150Triax - Cascade. The purpose is to measure I/V measurement, ohmic measurements etc. It has 4 individually adjustable triax connected probes, but can be fitted with additional coax connected probes. The stage can be moved in x and y to step and repeat a measurement over a large number of chips.
Samples can be inspected by either a microscope and/or a camera.
Two Keithley 2450 source meters are connected to the probe station by triax cables. An additional Keithley 2410 source meter and a Keithley 2000 multi meter is connected by coax cables. All Keithleys can also be connected with banana wires.
Performance and Process Parameters
|
Purpose |
Electrical measurements |
|
|---|---|---|
|
Performance |
Pad size |
|
|
Substrates |
Batch size |
|
| Substrate materials allowed |
|