LabAdviser/Safety

THIS PAGE IS UNDER CONSTRUCTION The content on this page, including all images and pictures, was created by DTU Nanolab staff, unless otherwise stated.

Safety at DTU Nanolab

At DTU Nanolab, we are interested in the safety of both, our employees and our users. As we are a multiuser facility, we need to establish working procedures to provide the best possible safety for our working environment. These are based on general safety procedures, EU regulations, and procedures we identified to be important for our working environment. Each user of our facility is expected to comply to these rules.

Before any user gets granted access to the labs, she/he needs to go through an introductory program. These programs will equip you with all the prerequisites required for accessing and engaging in safe practical work at DTU Nanolab.Please find more detailed information about the content, schedule, and how to sign up below or on https://www.nanolab.dtu.dk/access

For your own safety and the safety of other cleanroom users, we cannot admit anybody to the cleanroom who has insufficient English proficiency. Please contact adm@nanolab.dtu.dk or +45 25 57 43 in case of questions.

Introductory Courses to Facilities at DTU Nanolab

The extent of the training program depends on which facilities (and equipment) you would like to access.

For accessing equipment located in our cleanroom (building 346), please sign up here:

https://www.nanolab.dtu.dk/access/cleanroom-access

For accessing equipment or facilities outside the cleanroom, either in building 307, 314, 346,or 347, a general lab-introduction course for the labs outside the cleanroom, followed by a location-specific course is required.

For accessing equipment located in building 346 or 347, but outside the cleanroom, please sign up here:

https://www.nanolab.dtu.dk/access/other-facilities

For accessing our electron beam microscopy equipment located in building 314 or 307, please sign up here (refer to “characterization labadviser page”):

https://www.nanolab.dtu.dk/access/characterization

After registration, you will be registered in our system by our administration. You should receive an automatically generated email from DTU Nanolab with information regarding

• Log-in data to DTU Learn and labmanger.dtu.dk
• Access card: A guest card can be issued immediately. A permanent card will be issued after completing the relevant introductionary course.
• Link to the respective introductory course on DTU Learn
  • “DTU Nanolab Introductory Course: Cleanroom in B346"
  • “DTU Nanolab - Introduction course for Nanolab facility (Not Cleanroom in B346)”

You can find more information on what Labmanager (equipment management system) and Labadviser (information management system) are and how they work on Labadviser and in the introductory course on DTU Learn.

If you signed up for access to our cleanroom, you will also be registered on the cleanroom mailing list. All information regarding the cleanroom and its equipement will be send to this email list. If you would like to be removed (cleanroom mailing list), please contact adm@nanolab.dtu.dk

Please contact nanolabsupport@nanolab.dtu.dk, if you did not receive an email upon registration, or if you have issues logging into DTU Learn.