Feedback to this page: click here
Unless otherwise stated, all content in this section was done by Berit Herstrøm, DTU Nanolab
Start parameters, variations noted in the gallery headline
|
Recipe name: no 10 with lower platen power
|
Coil Power [W]
|
2500
|
Platen Power [W]
|
200
|
Platen temperature [oC]
|
20
|
H2 flow [sccm]
|
25.6
|
C4F8 flow [sccm]
|
25.6
|
He flow [sccm]
|
448.7
|
Pressure
|
Fully open APC valve (8-9 mTorr)
|
Electromagnetic coils (EM) 'outer coil' / 'inner coil'
|
'2 A' / '30 A'
|
- 100 nm Cr mask etched in ICP metal with 500nm DUV neg resist (NUV 2300-0.5) and 65 nm barc.
- SiO2 etch with Cr mask on full wafer 6 min etch
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, O2:5sccm
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:225sccm, Pressure:3.35mTorr
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:225sccm, Pressure:3.35mTorr; platen power 150W, coil power:1200W
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:215sccm O2:10sccm, Pressure:3.6mTorr; platen power 150W, coil power:1200W
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:205sccm O2:20sccm, Pressure:3.6mTorr; platen power 150W, coil power:1200W
-
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:215sccm O2:10sccm, Pressure:3.6mTorr; platen power 150W, coil power:1800W
-
-
-
-
-
-
- SiO2 etch with Cr mask on wafer piece on Si carrier 6 min etch, H2:0sccm, C4F8:13sccm He:215sccm O2:10sccm, Pressure:3.6mTorr; platen power 150W, coil power:1800W
-
-
-
-
-