Specific Process Knowledge/Thermal Process/Oxidation/Wet oxidation E1 furnace

From LabAdviser

Feedback to this page: click here

Unless otherwise stated, this page is written by DTU Nanolab internal

An acceptance test has been done after the installation in November 2021 by Tempress. For wet oxidation at 1050 C and 30 minutes, the thickness variation over a wafer was 1.3%(wafer in wafer), over the boat was 0.35%(wafer to wafer) and ran to ran was 0.64%.


Acceptance test by Tempress from November 2021.
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thermal_Process/Oxidation/Wet_oxidation_E1_furnace&oldid=46569"