LabAdviser/Courses/TPT Thin Film

Feedback to this page: click here

Thin Film TPT

DTU Nanolab offers a Tool Package Training (TPT) course in thin film growth and deposition techniques.

Users that have to use any thin film growth and/or deposition tools in the cleanroom will have to sign up for the lectures before they apply for a training (i.e. it is possible to get a training and then attend the lectures afterwards).

Thin film tool package training (TPT)
Schedule	Theoretical part 1^st lecture (2 hours): An introduction to thin films Material properties Overview of different thin film techniques at DTU Nanolab – 1^st part: Thermal oxidation Electroplating Sign up for the next lecture here: https://danchip.doodle.com/poll/k4pdm2n4bpseww5e. No Thin Film TPT courses have been scheduled before the summer vacation. If you are interested in attending the course now, please send an email to thinfilm@nanolab.dtu.dk. If you are a small group of people, then we will try to schedule a lecture. 2^nd lecture (3 hours): Vacuum basics Overview of different thin film techniques at DTU Nanolab – 2^nd part: PVD (physical vapour deposition) E-beam evaporation Thermal evaporation Sputtering CVD (chemical vapour depostion) LPCVD (low pressure chemical vapour deposition) PECVD (plasma enhanced chemical vapour deposition) ALD (atomic layer deposition) Sign up for the next lecture here: https://danchip.doodle.com/poll/4r3ydwzzbrdepgpf No Thin Film TPT courses have been scheduled before the summer vacation. If you are interested in attending the course now, please send an email to thinfilm@nanolab.dtu.dk. If you are a small group of people, then we will try to schedule a lecture. Practical part None
Location	Theoretical part The location of the lectures will be notified in the doodles
Qualified prerequisites	None
Preparations	Read Sami Franssila "Introduction to Microfabrication" (2010), Chapter 5: Thin-Film Materials and Processes (Available online from DTU campus).
Course responsible	The Thin Film group at DTU Nanolab (thinfilm@nanolab.dtu.dk)
Learning goals	Be aware of relevant material properties for thin films made in the cleanroom Understand importance of correct process pressure (for vacuum processes) Understand different thin film techniques Compare and be able to select appropriate thin film technique