Specific Process Knowledge/Wafer Information
Feedback to this page: click here
Wafer Information
DTU Danchip has a stock of silicon and glass wafers; the most used of these wafers are located on the wafer cupboard in cleanroom B-1. Whenever you want to buy some wafers you login to Labmanager and find the wafer shop. Here you can see a list of wafers that we have on stock. Most of these are in the cupboard, some are in our basement and you must contact a Nanolab personel for buying these. In the list you can see the specifications, prices as well as a link to a pdf file with more detailed information. Be sure that the wafers you want to buy in the shop wafer shop are in the cupboard before buying. By buying in the shop the door to the cupboard will unlock for 30 sec and the door can be opened by twisting the handle counter clock wise, leave the door open while taking the wafers you have bought. After taking the number of wafers you have bought place the wafer box back into the cupboard and remember to close the door. this will lock the door. When taking new wafers always use the dedicated vacuum tweezer hanging on the wall labeled New Wafers.
If you buy wafers that have to go directly from the wafer box into any of the LPCVD furnaces or C1 buy the numbers of wafers you need minus one. This unlock the door, take the box to the furnace as you close the door to the cupboard, load your wafers into the furnace. Then buy the last wafers for unlocking the cupboard door again such that the wafer box can be placed in the cupboard again.
DTU Danchip seeks always to have new deliveries of wafers on stock. They will be available when the previous delivery has been used.
The wafer box name consists typically of a few letters and a number, eg OP337:
| waferbox name OP337 | ||
| O | P | 337 |
|---|---|---|
| Indicates the company where the wafers are bought | Type of doping in the wafer | shipment number |
Wafers available in DTU Danchips cleanroom
| Wafers available in the cleanroom | |||||
| Shelf | Size | Type | Thickness | Resistivity | |
|---|---|---|---|---|---|
| SSP (single side polished) | bottom | 2" | P | 500 µm | 1-20 Ωcm |
| SSP (single side polished) | bottom | 4" | N+P | 525 µm | 1-20 Ωcm |
| SSP (single side polished) | top | 6" | N or P | 625 µm | 1-20 Ωcm |
| DSP (double side polished) | middle | 4" | N+P | 350 µm | 1-20 Ωcm |
| preprocessed | top | 4" and 6" | |||
| Boron glasswafers | middle | 4" | 1 mm | ||
Wafer boxes and single wafer carriers
New clean wafer boxes and single wafer carriers can be found in the gowning area. Ask DTU Danchip personnel for help if stock is low.