Specific Process Knowledge/Characterization/KLA-Tencor Surfscan 6420

Feedback to this page: click here

KLA-Tencor Surfscan 6420

The image is from the cleanroom at the place it was refurbish in California.

The KLA-Tencor is a surface analysis instrument for detecting, couting and sizing of particles, i.e. light point defects. A broad range of particles size from 0.15 µm to greater than 3 µm can be measured on a polished silicon surface with or without or epitaxial layers. The particle contamination in thin films like nitride, thermal oxide and polymer or resist can also be inspected. The system will remove small surface roughness so it will not count as particle contaminations.

Surfscan 6420

Process information

• Acceptance test results

Overview of the performance of the Surfscan 6420 and some process related parameters

Purpose		Detecting, counting and sizing of particles (light point defects)
Performance	Particles size	0.15 µm to > 3 µm
	Througput	Up to 100 wafer per hour (200 mm)
	Repeatbility	Within 1%, 1σ (mean count > 500, 0.204 µm diameter latex spheres)
Process parameter range	Process Temperature	Room temperature
Substrates	Batch size	1-25 100 mm wafers 1-25 150 mm wafers 1-25 200 mm wafers (loader has to be changed)
	Substrate materials allowed	Silicon Thin layers of oxide, nitride and polymer/resist