Specific Process Knowledge/Lithography/CSAR
Test of Chemically Semi-Amplified Resist (CSAR); a positive e-beam resist from AllResist (AR-P 6200-2).
| Spin Coat of AllResist AR-P 6200-2, TIGRE, 09-04-2014 | ||
|---|---|---|
| Equipment | Process Parameters | Comments |
| Spin Coater Manual, LabSpin, A-5 | 60 sec at various spin speed. Acceleration 4000 s-2, softbake 5 min at 150 deg Celcius | Resist poured directly from bottle |
| E-beam Exposure, TIGRE, 10-04-2014 | ||
| JEOL 9500 E-beam writer, E-1 | Dosepattern 14nm - 100nm, dose 120-280 muC/cm2 | Virtual chip mark height detection |
| AllResist SX 6200/2 spinning on Manual Spinner LabSpin A-5, TIGRE, 09-04-2014 | ||||||
|---|---|---|---|---|---|---|
| Spin Speed [rpm] | Acceleration [1/s2] | Thickness [nm] | St Dev | |||
| 2000 | 4000 | |||||
| 3000 | 4000 | |||||
| 4000 | 4000 | |||||
| 5000 | 4000 | |||||
| 6000 | 4000 | |||||
| 7000 | 4000 | |||||