Specific Process Knowledge/Thin film deposition/Deposition of Tin

From LabAdviser

Feedback to this page: click here


Tin can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.


E-beam evaporation (Alcatel)
General description E-beam deposition of Sn
Pre-clean RF Ar clean
Layer thickness 10Å to 1µm*
Deposition rate 2Å/s to 15Å/s
Pre-clean RF Ar clean
Batch size
  • Up to 1x4" wafers
  • smaller pieces
Allowed materials
  • Silicon
  • Silicon oxide
  • Silicon (oxy)nitride
  • Photoresist
  • PMMA
  • Mylar
  • SU-8
  • Metals
Comment

* For thicknesses above 200 nm permission is required.

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_Tin&oldid=14195"