Specific Process Knowledge/Characterization/KLA-Tencor Surfscan 6420

From LabAdviser
Jump to navigation Jump to search

THIS PAGE IS UNDER CONSTRUCTIONUnder construction.png

Feedback to this page: click here

KLA-Tencor Surfscan 6420

The image is from the cleanroom at the place it was refurbish in California.

Particles counting of a unpatterned surface. A broad range of particles size from 0.1 µm to greater than 3 µm can be measured on a polished silicon or epitaxial layers. Thin films as e.g. Poly-si, Nitride and thermal Oxide can also be inspected. The system will remove small surface roughness so it not count as a particle.


The user manual(s), quality control procedure(s) and results, user APV(s), technical information and contact information can be found in LabManager:

LabManager

Overview of the performance of the Surfscan 6420 and some process related parameters

Purpose
Performance
Process parameter range Process Temperature
  • Room temperature
Process pressure
  • 1 atm
Substrates Batch size
  • 1-25 100 mm wafers
  • 1-25 150 mm wafers
Substrate material allowed
  • Silicon wafers (new or RCA cleaned wafers)
  • From A2 furnace directly (e.g. incl. Predep HF)
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Characterization/KLA-Tencor_Surfscan_6420&oldid=9727"