Specific Process Knowledge/Characterization/XPS

XPS

See more about elemental analysis on the side Element analysis

Purpose	Chemical analysis	Probing elemental composition Chemical state identification Non destructive technique Surface sensitive Depth profiling possible by ion beam etch of sample
Performance	Spot size	Can be set between 30µm - 400µm
	Probing depth	Depending on probed element. Max probe depth lies within 10-200 Å.
	Resolution	Dependent on probed elements. Concentrations down to about 0,5 atomic % can in some cases be detected.
	Charge compensation	Flood gun can be used for charge compensation of non conductive samples
	.	µm
Depth profiling	uu	5
Substrates	Substrate size	Max 60x60 mm
	Substrate thickness	Max height about 20 mm