Specific Process Knowledge/Thin film deposition/Deposition of Molybdenum

From LabAdviser
< Specific Process Knowledge‎ | Thin film deposition
Revision as of 08:09, 19 September 2011 by Kn (talk | contribs) (New page: Palladium can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment. {| border="1" cellspacing="0" cellpadding="4" ! ! E-beam evapor...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Palladium can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.


E-beam evaporation (Alcatel)
Batch size
  • Up to 1x4" wafers
  • smaller pieces
Pre-clean RF Ar clean
Layer thickness 10Å to 1µm
Deposition rate 2Å/s to 15Å/s
Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_Molybdenum&oldid=5654"