Jump to content

Specific Process Knowledge/Thin film deposition/Deposition of Palladium

From LabAdviser

< Specific Process Knowledge‎ | Thin film deposition

Revision as of 14:38, 5 February 2009 by BGE (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Palladium can be deposited by e-beam evaporation. In the chart below you can compare the different deposition equipment.

	E-beam evaporation (Alcatel)	E-beam evaporation (Leybold)
Batch size	Up to 1x4" wafers smaller pieces	8x4" wafers or 5x6" wafers
Pre-clean	RF Ar clean	Ar ion bombartment
Layer thickness	10Å to 1µm	10Å to 1500Å
Deposition rate	2Å/s to 15Å/s	1Å/s to 5Å/s

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Thin_film_deposition/Deposition_of_Palladium&oldid=3442"