Specific Process Knowledge/Lithography/EBeamLithography/EBLProcessExamples

From LabAdviser
< Specific Process Knowledge‎ | Lithography‎ | EBeamLithography
Revision as of 11:54, 8 September 2023 by Thope (talk | contribs) (Created page with "This page is under construction. In time we will fill it with relevant process examples and relevant data. =Single spot EBL= Arrays of circular holes can be created by normal area writing of a mask of circular structures. It can however also be done with a single spot approach, where the beam will dwell at each spot for several µs and hence each spot will become a circular structure by local over exposure. You can read more about this method in the linked article. '''...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page is under construction. In time we will fill it with relevant process examples and relevant data.

Single spot EBL

Arrays of circular holes can be created by normal area writing of a mask of circular structures. It can however also be done with a single spot approach, where the beam will dwell at each spot for several µs and hence each spot will become a circular structure by local over exposure. You can read more about this method in the linked article.

Single-spot e-beam lithography for defining large arrays of nano-holes


Article on quality control on the JEOL 9500 system

Quality control of JEOL JBX-9500FSZ lithography system in a multi-user laboratory

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Lithography/EBeamLithography/EBLProcessExamples&oldid=47371"