Specific Process Knowledge/Thin film deposition/Deposition of Titanium Nitride

Feedback to this page: click here

Deposition of Titanium Nitride

Thin films of Titanium Nitride (TiN) can be deposited by either ALD or reactive sputtering. If sputtering is used, the target is Ti and nitrogen (N₂) is added as reactive gas to the chamber resulting the formation of Titanium Nitride on the sample. The process information is available below:

TiN deposition using ALD.

TiN deposition with reactive sputtering using Lesker sputter tool.

TiN deposition with reactive sputtering using Sputter-System Metal-Oxide (PC1).

Comparison between sputtering and ALD methods for deposition of Titanium Nitride.

	ALD2	Sputter-System Metal-Oxide (PC1)/Sputter-System Metal-Nitride (PC3)	Sputter-System(Lesker)
Generel description	Atomic Layer Deposition	Reactive sputtering Pulsed DC reactive sputtering Reactive HIPIMS (high-power impulse magnetron sputtering)	Reactive sputtering
Stoichiometry	TiN	TiN (can be tuned)	TiN (can be tuned)
Film Thickness	0 nm - 50 nm	few nm - ? (hundreds of nm)	few nm - 200 nm
Deposition rate	0.0173 nm/cycle on a flat sample 0.0232 nm/cycle on a high aspect ratio structures	about 0.12 nm/s, depends on sputtering parameters, check processlog in LabManager	up to 0.0625 nm/s on a flat sample
Step coverage	Very good	not known yet	Not investigated
Process Temperature	450 °C	Up to 600 °C	Up to 400 °C
Substrate size	Several small samples 1-5 50 mm wafers 1-5 100 mm wafers 1-5 150 mm wafer	Many small samples Up to 10x100 mm or 150 mm wafers	Several small samples 100 mm wafer 150 mm wafer
Allowed materials	Silicon Silicon oxide, silicon nitride Quartz/fused silica Al, Al₂O₃ Ti, TiO₂ Other metals (use dedicated carrier wafer) III-V materials (use dedicated carrier wafer) Polymers (depending on the melting point/deposition temperature, use carrier wafer)	Silicon Silicon oxide, silicon nitride Quartz/fused silica Metals III-V materials (use dedicated carrier wafer) Almost anything that is not toxic and does not outgas	Silicon Silicon oxide, silicon nitride Quartz/fused silica Metals III-V materials (use dedicated carrier wafer) Almost anything that is not toxic