Jump to content

Specific Process Knowledge/Etch/DRIE-Pegasus/Pegasus-2/TemperatureSettings

From LabAdviser

< Specific Process Knowledge‎ | Etch‎ | DRIE-Pegasus‎ | Pegasus-2

Revision as of 16:37, 15 December 2020 by Jmli (talk | contribs) (→‎Correct settings for temperatures on Pegasus 2)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Correct settings for temperatures on Pegasus 2

The Platen chiller temperature is enabled and the setpoint is 20 degrees. This setting could be applied to all the heaters, however, the best way by far is to run the processes without enabling

Retrieved from "https://labadviser.nanolab.dtu.dk//index.php?title=Specific_Process_Knowledge/Etch/DRIE-Pegasus/Pegasus-2/TemperatureSettings&oldid=37845"